CFL Lamp

Replacement for Halogen with CFL Lamp
(6W / 12W / 23W , Warm / White Light)

Advantages

•Energy saving up to 4~5 times compared to halogen bulb

•Lower heat generated

•Lifespan at least 8000 hours

•Wattage 5 W to 23W

•Available in globe, cup , spiral and bulb shape

Summary Comparison Table for Halogen Bulb and CFL Lamp

LED Bulbs

saveOne LED Bulbs

Unit Price: S$8.00 per pair

Energy Saving Applications:

Praying Lamp Bulbs

5W incandescent bulb used in praying lamp consumes 3.6kw/month or an electricity bill of S$0.90/mth or S$10.80/year.

*Using 0.29W saveOneTm LED bulb replacement consumed 0.21kw/month or an electricity bill of S$0.05/mth or S$0.60/year.

*Based on S$ 0.258/kwhr as of 1 July 2010 and 24 hours usage. The saving/bulb is 3.39kw/month or
S$0.875/mth or S$10.20/year. Cost of replacing 4 incandescent bulbs per year is S$1/year, is expensive on long term basis and inconvenient, and energy inefficient.

Colour: Warm White , Daylight , Red

Power Saver

Super Intelligent Digital Energy Saving Equipment
Adopting the most advanced, intelligent, digital technology to save energy

Unit Price: S$48

• Up to 35% saving on your electricity bills          
• Rated load up to 24,000W~50,000W
• Rated voltage 90V~250V, 50~60Hz               

• Working temperature 15~60°C
• Single phase model                                       
• Protect the enviroment
                                    
- In the process of development of recyclable economy, the hindering factor rests on the approach to reduce the consumption of resources.

- The fundamental principle of power compensation is the parallel connection of a capacitve power loading device and an inductive power loading device in the electric circuit. Whenever the capacitive load discharges, the other part, inductive load would be changed and vice versa. Energy is Interchanged between them. Part of energy charged to the inductive power-loading device is compensated by the energy discharged from the capacitive power-loading device.

- Instant compensation particularly refers the compensation made to the end point electric apparatus. Installation of the device would be at the power source near the apparatus in the circuit. The device is low-cost, small in size, highly effective and can be installed easily. It would be essential to implementation of power saving.

- Features: local balanced current; improve the quality of power supply provided th the end point electric apparatus; lift the effectiveness of power usage and reduce the amount lost.

LED Night Lamp

Unit Price:S$12

• Ultra low electricity consumption. 24 hours /day or 365 days of use, consumes only S$0.80 of electricity per year.
• On automatically in dark and turns off when the daytime comes.
• Size: 140mm X 143mm X 57mm
• Light Source : LED
• Material : ABS + Glass

LED Table Lamp

Energy Saving LED Table Lamp

Unit Price: S$30

Electronic Ballast

Electronic Ballast for Circular Lamp

saveOne™ ballast is uniquely developed for up to 40W fluorescent circular lamps ranging from T4 to T12. It can also be used for Halogen or Tri-phosphor coated fluorescent lamps. It is patented with a light weight feature designed to be able to be held onto circular fluorescent lamp fittings without any mechanical fastener. This cuts down installation and replacement time. It has also complied with the safety requirements of Singapore Standard SS490: Part 2:3:2002 (and IEC 61347-2-3:2000), used together with SS490 Part1:2001 (and IEC 61347-1:2000)

Unit Price : S$ 9.80

Benefits:

- Non-Flickering

-Better brightness luminance

- No starter needed

- Lower heat generated -Soft instant start
- Use only 0.125A
- Easy to install
- Prolong lamp life
- Safety Mark 10142-11

Safety: Switch off the power before doing any installation of saveOne™ ballasts. Use qualified electrician for the installation.

Installing saveOne™ ballast onto a new circular lamp fitting :-
-Install the lamp fitting with the circular fluorescent lamp onto the ceiling.
-Connect the 2 wires of the saveOne™ ballast to a 2 way connector and then connect the Live and Neutral wires of the power supply coming from the ceiling with this connector.
-Connect the earth wire onto the lamp fitting plate. Then, connect the ballast direct onto the 4-pins connection of the lamp.
-The ballast is now ready to power up the lamp.


Replacing an existing magnetic ballast with saveOne™ ballast :-
-Remove the starter holder and the starter from the existing lamp fitting.
-Connect the 2 wires of the saveOne™ ballast to a 2 way connector and then take the Live and Neutral wires of the power supply coming from the ceiling to be connected with this conector.
-You may leave the earth wire and the existing ballast as it is, as it is normally fastened beneath the ballast
-Connect the saveOne™ ballast onto the circular lamp, and its ready to power up the lamp.

GPS

Model: LH900N

Unit Price : S$ 130

Features

• OS Wince NET5.0

• Super visual enjoyment with 4.3 inch, 16:9 TFT screen
• Unique style with full-touch, non-button design
• Eroda private 3D virtual navigation map
• Automatically reverse images with the GPS specific wireless reversing camera
• Super signal receiving capacity, automatic speed tips, FM wideband emission and multi-path search mode.



Model: E300

Unit Price : S$150

Features

• 5-inch TFT touch screen, fourth generation chips and FM full frequency emission

• Direct Support for RMVB player
• Built in high sensitivity antenna
• He triple-play of navigation, fixed velocity measurement and mobile velocity measure available with external high sensitivity radar G500
• Wince NET6.0